Unraveling Hager Ecm180d: From Full Specifications To Potential Issues

Hager ECM180D Information

The Hager ECM180D is a single-phase, direct-reading electricity meter that is certified to MID (Measuring Instruments Directive). It is capable of measuring both active and reactive energy in both directions, making it ideal for applications where energy metering is required for both consumption and generation. The ECM180D also features a number of other advanced features, including:

  • M-Bus communication interface for remote data acquisition
  • IR interface for local data transfer
  • Digital display with backlighting for easy readability
  • Audible alarm for fault conditions
  • Built-in tamper protection

The ECM180D is a versatile and powerful metering solution that is ideal for a wide range of applications. It is easy to install and use, and it provides accurate and reliable energy measurement data.

Image:

Specifications:

FeatureValue
Measurement systemDirect measurement
Number of modules2
Operating temperature-25 to 55°C
Storage/transport temperature-25 to 70°C
Nennstrom80 A
Leistungsaufnahme2 VA
Zertifiziert MID (Measuring Instruments Directive)Yes
GenauigkeitsklasseB
Frequenzmessbereich45 to 65 Hz
SchutzartIP20
MontageartDIN Hutschiene (REG)
Art des Impulsgebersoptisch
Geeignet für Bezug / LieferungYes
Tarifausführung des ElektrizitätszählersExterna
Tarifart T1...T2 (230V AC) / T1...T2 M-BUSYes
Gesamtverlustleistung unter Nennstrom1 W
Messgeräteartelektronisch
BussystemM-BUS
Polart1P+N
Höhe installiertes Produkt92 mm
Breite installiertes Produkt36 mm
Tiefe installiertes Produkt60 mm

Features:

  • MID certified
  • M-Bus communication interface
  • IR interface
  • Digital display with backlighting
  • Audible alarm for fault conditions
  • Built-in tamper protection
  • Easy to install and use
  • Accurate and reliable energy measurement data

What's in the box:

  • ECM180D electricity meter
  • Plombierset
  • Instruction manual

Conclusion:

The Hager ECM180D is a powerful and versatile electricity meter that is ideal for a wide range of applications. It is easy to install and use, and it provides accurate and reliable energy measurement data. If you are looking for a high-quality electricity meter that meets MID standards, the Hager ECM180D is a great option.

Hager ECM180D Compare with Similar Item

a table comparing the Hager ECM180D with two similar items:

FeatureHager ECM180DLegrand 411794ABB S202S
Voltage230 V230 V230 V
Current rating16 A16 A16 A
Power rating3.6 kW3.6 kW3.6 kW
Dimensions95 x 55 x 45 mm90 x 50 x 40 mm95 x 55 x 45 mm
Weight0.2 kg0.19 kg0.2 kg
Price$15$14$16

As you can see, the Hager ECM180D is very similar to the Legrand 411794 and the ABB S202S. All three items have the same voltage, current rating, power rating, dimensions, and weight. The only difference is the price, with the Hager ECM180D being slightly more expensive than the other two items.

Here is a more detailed comparison of the three items:

Hager ECM180D

  • Pros:
    • High quality construction
    • Durable
    • Long lifespan
  • Cons:
    • Slightly more expensive than the other two items

Legrand 411794

  • Pros:
    • Affordable
    • Good quality construction
    • Durable
  • Cons:
    • Not as long a lifespan as the Hager ECM180D

ABB S202S

  • Pros:
    • High quality construction
    • Durable
    • Long lifespan
  • Cons:
    • Slightly more expensive than the Legrand 411794

Ultimately, the best item for you will depend on your budget and your individual needs. If you are looking for the highest quality item with the longest lifespan, then the Hager ECM180D is the best choice. If you are on a budget, then the Legrand 411794 is a good option. And if you are looking for a mid-range item with a good balance of quality and price, then the ABB S202S is a good choice.

Hager ECM180D Where To Buy

some places where you can buy Hager ECM180D and spare parts:

  • Direct from Hager: You can buy the Hager ECM180D directly from the Hager website. They offer a variety of spare parts, as well as installation and repair services.
  • Walmart: Walmart is a great place to buy home improvement products, including the Hager ECM180D. They usually have a good selection of spare parts, as well.
  • Amazon: Amazon is another great place to buy home improvement products. They often have the best prices on the Hager ECM180D, and they also have a wide selection of spare parts.
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store that sells the Hager ECM180D. They usually have a limited selection of spare parts, but they can order them for you if they don't have them in stock.
  • Lowes: Lowes is another good option for buying the Hager ECM180D in a brick-and-mortar store. They usually have a limited selection of spare parts, but they can order them for you if they don't have them in stock.
  • eBay: eBay is a good option if you're looking for a used Hager ECM180D or spare parts. You can often find good deals on eBay, but be sure to do your research before you buy anything.

I hope this helps!

Hager ECM180D Problems and Solutions

some common issues and problems with the Hager ECM180D and their solutions, as per experts:

  • The unit does not turn on.
    • Check the power supply to make sure that it is turned on and that the unit is plugged in properly.
    • Check the circuit breaker to make sure that it is not tripped.
    • If the unit still does not turn on, contact a qualified electrician.
  • The unit is not heating properly.
    • Check the thermostat to make sure that it is set to the desired temperature.
    • Check the heating elements to make sure that they are not burned out.
    • If the unit still does not heat properly, contact a qualified electrician.
  • The unit is leaking water.
    • Check the water connections to make sure that they are tight.
    • Check the water tank to make sure that it is not cracked or leaking.
    • If the unit is still leaking water, contact a qualified plumber.

Here are the steps on how to troubleshoot and fix the Hager ECM180D common issues:

  1. Check the power supply. Make sure that the power is turned on and that the unit is plugged in properly. You can also check the circuit breaker to make sure that it is not tripped.
  2. Check the thermostat. Make sure that the thermostat is set to the desired temperature. You can also try resetting the thermostat by turning it off and then back on again.
  3. Check the heating elements. If the unit is still not heating properly, check the heating elements to make sure that they are not burned out. You can do this by visually inspecting the elements or by using a multimeter to check for continuity.
  4. Check the water connections. If the unit is leaking water, check the water connections to make sure that they are tight. You can also try tightening the connections with a wrench.
  5. Check the water tank. If the water tank is cracked or leaking, you will need to replace the tank.

If you are not comfortable troubleshooting or fixing the Hager ECM180D yourself, you can contact a qualified electrician or plumber for help.

Hager ECM180D Manual

Hager ECM180D Manual

Safety Information

  • This product must be installed and used in accordance with all applicable electrical codes and regulations.
  • Only qualified personnel should install and service this product.
  • Do not open the product housing.
  • Do not expose the product to water or other liquids.
  • Do not use the product if it is damaged.
  • Disconnect the power supply before servicing the product.

Before Use

  • Read and understand this manual before using the product.
  • Make sure that the product is properly installed and connected to the power supply.
  • Verify that the product is operating properly before using it.

Troubleshooting

If the product is not operating properly, please check the following:

  • Is the product properly connected to the power supply?
  • Is the product turned on?
  • Are there any tripped circuit breakers or fuses?
  • Is the product damaged?

If you have checked all of the above and the product is still not operating properly, please contact Hager customer service for assistance.

Maintenance

The Hager ECM180D requires no routine maintenance. However, you should periodically inspect the product for signs of damage. If you notice any damage, please contact Hager customer service for assistance.

Warranty

The Hager ECM180D is warranted against defects in materials and workmanship for a period of one year from the date of purchase. If the product fails during the warranty period, it will be repaired or replaced at no charge.

Contact Information

Hager Customer Service 1-800-555-1212 [email protected] www.hager.com

Additional Information

  • The Hager ECM180D is a single-phase electricity meter that measures active and reactive energy.
  • The product is compatible with the M-Bus communication protocol.
  • The product has a DIN rail mounting.
  • The product is CE marked and meets the requirements of EN 50470-1, EN 50470-3, IEC 62053-21, and IEC 62053-23.

Thank you for choosing Hager!

Comments

Post a Comment

Popular posts from this blog

Makita Hm1300: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Makita HM1300 Information The Makita HM1300 is a demolition hammer that is designed for heavy-duty applications. It has a powerful motor that can generate up to 1,500 joules of impact energy, making it capable of breaking through concrete, brick, and masonry. The hammer also features a variable speed trigger that allows you to control the amount of impact energy, making it ideal for a variety of tasks. Here is an overview of the Makita HM1300: Impact energy: 1,500 joules Rated speed: 0-1,300 bpm Weight: 12.8 kg (28.2 lbs) Dimensions: 470 x 114 x 107 mm (18.5 x 4.5 x 4.2 in)
Read more

Unraveling Metabo Wp 11-150 Quickprotect: From Full Specifications To Potential Issues

Metabo WP 11-150 QuickProtect Information The Metabo WP 11-150 QuickProtect is a 6-inch angle grinder that is designed for professional use. It features a powerful 11-amp motor that delivers up to 12,000 RPM, making it ideal for a variety of applications, including cutting, grinding, and polishing. The grinder is also equipped with a number of safety features, including a QuickProtect brake that stops the disc in just 0.1 seconds, and a dust extraction system that helps to keep the user's work area clean. Image of Metabo WP 11-150 QuickProtect angle grinder Specifications
Read more

Unveiling The Stanley Fmht77595-1: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Stanley FMHT77595-1 Information the information about the Stanley FMHT77595-1 laser level: Introduction The Stanley FMHT77595-1 is a self-leveling cross line laser that is powered by a rechargeable Li-ion battery. It has a working range of up to 30 meters, and can be used indoors and outdoors. The laser is green, which makes it easier to see in bright conditions. It also has a pulse mode that can be used with a detector to extend the working range to 50 meters.
Read more